PVC Glue 30 g
PVC glue for repairing small holes and slots on PVC inflatable boats.
Method of use:
Surfaces must be dry, free of grease and other contaminants.
Prepare a patch of PVC.
Sand the surfaces lightly.
Apply a primer layer, then with an interval of 5 minutes apply a second and third layer, after applying the third layer wait 10-15 minutes and press both parts well. Use a hard roller to roll the repaired area, and you can also use a suitable object for long-term clamping.
Do not operate the boat earlier than 24 hours after the repair.
Attention:
Keep out of reach of children.
It is very toxic in case of spillage.
Close the package tightly after use.
Use outdoors or in well-ventilated areas.
Use gloves when working.
Do not expose to open flame.
Store at a temperature of 10 to 30 C
